Page 3
Quartz Analogue Part SETTING THE TIME 1)Pull the crown out to the 1st position 2)Turn the crown to set hour and minute hands 3)When the crown is pushed back to the normal position, second...
Page 4
Digital Part Show hour, minutes, seconds and day of the week; In the normal time mode: Press S1 to show month and date; Press S2 to show Press S3 to enter chronograph mode; Press S4/S5 to activate TO SET TIME AND DATE In normal time mode, press S3 three times, and then get into the time setting mode, the Second will begin to flash;Press S1 to reset the Second;...
Page 5
TO SET ALARM CLOCK In normal time mode:Press S3 twice. Hour will flash. Press S1 to Press S2 once. The alarm minute will flash, press S1 to advance Press S3 to return to the normal time mode; Alarm is activated by pressing S1and S2 Simultaneously. The indicator will appear.
Page 6
TO USE AS STOPWATCH: In the normal time mode: Press S3 once to get into the Chronograph, press S1 to start and press S2 to reset to zero. After the chronograph has been stopped. Press S3 to return to time. In the normal time mode: Press S3 once to get into the chronograph mode.
Need help?
Do you have a question about the HE-105 Freeride Ana-Digi and is the answer not in the manual?
Questions and answers