Sharp 21V-FW100S Service Manual page 28

21V-FW100S
MODEL NAME
ADJUSTMENT
ITEM
ADJUSTMENT
POSITION
CONTOROL
PRE-ADJUST
AFTER ALL ADJUSTMENT FINISHED.
REQUIREMENT
US 4 CH LION HEAD (MONOSCOPE PATTERN)
CONTENT
INPUT
AC 220V, RF INPUT
CONDITION
CRT ANODE VOLTAGE
OUTPUT
SET THE USER CONTROL TO SHIPMENT SETTING POSITION.PUSH ON Y - MUTE BY R/C
CONFIRM THE VOLTAGE OF CRT ANODE BY HIGH VOLTAGE METER AND MAKE SURE THE
READING IS AS BELOW.
ADJUSTMENT
PROCEDURE
[CAUTION POINT ]
USE ELECTROSTATIC HI-VOLTAGE METER AND FOLLOW THE UL / DHHS STANDARD TO MAKE
CORRECTION AND CONTROL.
HISTORY
OF REVISION
MODEL HIGH VOLTAGE
21V-FW100S BELOW 30kV
REVISED CONTENT .
SYMBOL
21V-FW100S
HIGH VOLTAGE
STEP RANGE
5 – 17