660
5-6. Using the hands-free phone system (for cellular phone)
Call waiting
When a connected call is interrupted by the third party, the
incoming call message will be displayed.
To talk with the other party: Select
steering wheel.
To refuse the call: Select
wheel.
Every time you select
after a call is interrupted, you will be switched to the other party.
If your cellular phone is not accepted in HFP Ver. 1.5, this func-
tion cannot be used.
The ring tone that has been set in the "Sound settings" screen
sounds when there is an incoming call. Depending on the type of
Bluetooth
sound simultaneously when there is an incoming call. (P. 666)
Transferring calls
It is not possible to transfer from hands-free to a cellular phone while driv-
ing.
If you transfer from a cellular phone to hands-free, the hands-free screen
will be displayed, and you can operate the system using the screen.
Transfer method and operation may vary according to the cellular phone
used.
For operation of the cellular phone in use, see the phone's manual.
Repeated tone symbols
When the "p" pause tone is used, after waiting 2 seconds the tone data up
until the next pause tone will be automatically sent. When the "w" pause tone
is used, the tone data up until the next pause tone will be automatically sent
after user operation.
While driving
Key input is unavailable.
Calls can be made by giving a speech command.
Interrupt call operation
LS460_EE (OM50D49E)
or press
®
phone, both the system and Bluetooth
or press
or press
on the steering
on the steering wheel
®
phone may
on the
Need help?
Do you have a question about the LS460 and is the answer not in the manual?