Lexus LS460 Owner's Manual page 377

366
4-5. Using the driving support systems
CAUTION

Handling the camera sensors (if equipped)
Observe the following to ensure that the PCS functions effectively:

Keep the windshield clean at all times.
PCS effectiveness may be reduced due to the presence of raindrops, con-
densation, ice or snow on the windshield.

Do not subject the camera sensor to a strong impact or force, and do not
disassemble the camera sensor.

Do not change the installation position of the camera sensor, or remove
and reinstall it. The direction of the camera sensor is precisely adjusted.

When the windshield fogs up, use the windshield defogger to dry the
windshield.
During cold weather, using the heater with air blowing to the feet may
allow the upper part of the windshield to fog up, having a negative effect
on the images.

Do not place anything on the dashboard.
Images reflected on the windshield may reduce the effectiveness of the
camera sensor.

Do not scratch the camera lens, or let it get dirty.

Do not attach a sticker or other items to the windshield near the camera
sensor.

Headlights (vehicles with camera sensors)

Observe the following to ensure proper near-infrared ray projection:
• Keep the headlights clean at all times.
• The detection performance may deteriorate if the high beams are mis-
aligned or inoperative.

The near-infrared ray transmitters project strong energy that is not visible.
Although the transmitters normally turn off when the vehicle is stopped,
never look into the headlights for your safety.
LS460_EE (OM50D49E)