Table of Contents
Advertisement
Quick Links
Edition 8 20151021
User manual
In order to use the Zitzi Delfi PRO in its full extent, it is important that you read
this manual. This applies to everyone close to the user.
The product is intended for users with seating problems and fits many different
kinds of diagnoses. Adaptation/fitting the Zitzi Delfi Pro must be done by a medi-
cally qualified person.
If you need additional information, please contact Anatomic SITT AB.
Advertisement
Table of Contents
Related Manuals for Zitzi DELFI PRO
Summary of Contents for Zitzi DELFI PRO
- Page 1 Edition 8 20151021 User manual In order to use the Zitzi Delfi PRO in its full extent, it is important that you read this manual. This applies to everyone close to the user. The product is intended for users with seating problems and fits many different kinds of diagnoses.
-
Page 2: Table Of Contents
Tillverkare / Manufacturer Check the checkbox if the product is Anatomic SITT AB CUSTOMIZED. The CE Mark is no longer Box 6137, SE-60006 Norrköping valid and should be removed. SWEDEN - Phone +46 (0)11-16 18 00 User manual 2 Zitzi Delfi Pro... -
Page 3: Mounting Of The Back
= Adjustment bolts The backrest is mounted with 4 bolts. Lock the back profile by tighten the bolts. The back will automatically be in the right place. Notice! For high tonus patients, select reinforced back! User manual 3 Zitzi Delfi Pro... -
Page 4: Seat Adjustments
- Move the leg part to desired track position. - Tighten the bolts when desired position is reached. (Default track for the leg parts is track 1) Track 1, 2, 3 = Adjustment bolts User manual 4 Zitzi Delfi Pro... - Page 5 Loosen the bolt with the hexa key and move the leg part to desired track position. Tighten the bolts when desired position is reached. = Adjustment bolts User manual 5 Zitzi Delfi Pro...
-
Page 6: Hip Angle Adjustments
When desired position is reached, let go of the lip and put it into ”child safe mode” It is very important that the lip is in the safety mode, resting downwards, when the adjustments are done. User manual 6 Zitzi Delfi Pro... - Page 7 - Loosen the bolts (A) on both sides of the back profile (2 on each side) - Adjust to desired height - Lock the bolts Place the back so you can take usage of the integrated lumber support! = Adjustment bolts User manual 7 Zitzi Delfi Pro...
-
Page 8: Adjustable Back
Knobs Adjustments Loosen the knob (2 on each side, 4 totally) and move the backrest to the desired position. Tighten the knobs when desired position is reached. User manual 8 Zitzi Delfi Pro... -
Page 9: Pelvic Support
To adjust the height of the pelvic support plate, unscrew the screws (E) and move the plate to the desired posi- tion. Then tighten the screws (E) again. User manual 9 Zitzi Delfi Pro... -
Page 10: Hip Belt
When mounting the hip belt in the hip belt tracks, use a tri-glide buckle. For assembly according to the tri-glide method, see picture. The tri-glide method Ensure that the belt is not clamped between the abutment and fitting. User manual 10 Zitzi Delfi Pro... -
Page 11: Mounting Of The Support Serie
(B) Lower brackets included as standard Alternative lower brackets (optional 285140) Be sure that there is enough space for the neck, that the cushions are in the right place and that the pressure is correct! = Adjustment bolts User manual 11 Zitzi Delfi Pro... -
Page 12: Armrest
Height adjustment, armrest plate: Loosen the knob (D) and adjust to desired position. Tighten the knob. Angle adjustment, armrest plate: Loosen the knob (E) and adjust to desired position. Tighten the knob. = Adjustment bolts User manual 12 Zitzi Delfi Pro... -
Page 13: Upper Arm Support
4 pc Bricka Distanser When mounting the upper arm support, the carriage bolt needs to be Spakvred replaced with the longer one supplied. When adjusting the upper arm support, even the chest pads is loosened. User manual 13 Zitzi Delfi Pro... - Page 14 Locking lever Fastening widths Choose between three different mounting holes Be careful not to lift the table in the forefront. User manual 14 Zitzi Delfi Pro...
- Page 15 Do not forget to tighten the finger knob (C) after precipitation of the table. Make sure to pull the table far enough ahead of the side when folding so that the user is not hurt. User manual 15 Zitzi Delfi Pro...
- Page 16 To adjust the width of the table, loosen the screws (D) slightly and adjust to desired position. Then tighten the screws (D). Locking lever If the width adjustment of the table attachment fittings is insufficient may some adjustment of the armrest width may be required. User manual 16 Zitzi Delfi Pro...
-
Page 17: Footrest
Loosen the knob (D) and adjust to desired position. Tighten when desired positions is reached. (A) Attachment, foorest (B) Angle adjustment knob, knee-joint = Adjustment bolts (C) Bolts for footrest angle (D) Bolts for footrest height User manual 17 Zitzi Delfi Pro... - Page 18 Height adjustment, foot plate - C Loosen the knob (C) and adjust to desired position. Tighten when desired positions is reached. = Adjustment bolts (A) Attachment, foorest (B) Angle adjustment knob, knee-joint (C) Screw (D) Screw User manual 18 Zitzi Delfi Pro...
-
Page 19: Footrest, Whole Adjustable
The foot plates width and depth can be adjusted. Loosen the bolts (D) and adjust to desired position. Tighten when desired positions is reached. (A) Knob, knee joint Footrest attachment = Adjustment bolts (D) Adjusting the foot plate (C) Angle adjustments, foot joint (B) Height adjustment, foot plate User manual 19 Zitzi Delfi Pro... -
Page 20: Footrest, Divided Adjustable
The foot plates width and depth (!) can be adjusted. Loosen the bolts (D) and adjust to desired position. Tighten when desired positions is reached. (A) Knob knee joint Footrest attachment (B) Height ad- justment, foot plate (C) Angle adjustments, foot joint (D) Adjusting the foot plate User manual 20 Zitzi Delfi Pro... -
Page 21: Footrest, Turn-Up
• Lock the screw when the desired angle is reached. Footrest - Flexible footrest adapter Flexible footrest Zitzi Delfi Pro can be equipped with a flexible footrest adapter to prevent spasticity and create a dynamic sitting. Height adjustment Loosen the screws (A) -
Page 22: Calf Support
Be sure that the cushion are in the right place! Lumbar support A) Take away the back lining B) Attach the lumbar support (within the marked area) with the following velcro. C) Put back the back lining Lumbar support User manual 22 Zitzi Delfi Pro... -
Page 23: Driving Bow
The heating package keeps the body temperature on an even level and prevent the patient to be cold. When normal body temperature has been reached, the heating package will turn off it self. If the temperature dips, the heating package will automatically activate it self again. User manual 23 Zitzi Delfi Pro... -
Page 24: Foldable Headrest Bracket
If the headrest need to be higher, loosen the knob (B) and then adjust the headrest into to desired position. Tighten the knob (B). = Adjustment bolts (A) Headrest bracket, 4 bolts with pins (B) Height adjustment knob User manual 24 Zitzi Delfi Pro... -
Page 25: Play Bow
How to dismantle the headrest, watch page 10. Mounting of the sun cover: - Loosen the knob on both sides (A). - Push the sun roof in the bracket (B). - Tighten the knobs (A). User manual 25 Zitzi Delfi Pro... -
Page 26: Mounting On A Frame
Keep pushing it until you hear a click. Then tighten the knob clock-wise underneath the seat plate to make sure the seating system stays in its place. Hole pattern Pull direction Pull downwards Knob User manual 26 Zitzi Delfi Pro... -
Page 27: Adapter System Pro
When both plates are mounted, these can be combined. The seating system is properly secured when you hear a click. Note! Ensure that the seating system is secure on the frame before use. User manual 27 Zitzi Delfi Pro... -
Page 28: Headpod Bracket
Loosen the screws (A) and remove the headrest from the headrest mount. Attach the bracket with the screws (B) and tighten the screws. Then reinstall the headrest on the headrest mount and tighten the screws (A). User manual 28 Zitzi Delfi Pro... -
Page 29: Footrest High Edge, Single Stay
The plastic stay (H) may after adjustment of desired height be cut or heated in under the footrest plate according to personal preference. Drillhole markings can also be found under the foot plate. User manual 29 Zitzi Delfi Pro... -
Page 30: From Single Stay To Double Stay/Technical Data
Whole/divided foot plate Size Height (A) Depth (B) 990041 / 990046 140 mm 130 mm 990042 / 990047 170 mm 160 mm 990043 / 990048 205 mm 190 mm 990044 / 990049 235 mm 240 mm User manual 30 Zitzi Delfi Pro... -
Page 31: Drilling Instructions Whole Footrest Plate
Clozitt double stay double stay Size 3 Size 4 Delfi Pro & Anatomic Sits single stay Anatomic Sits Anatomic Sits Seabass Pro Anatomic Sits & Clozitt single stay double stay double stay double stay User manual 31 Zitzi Delfi Pro... -
Page 32: Drilling Instructions Divided Footrest Plate
Anatomic Sits & Sharky Pro double stay Size 3 Size 4 Delfi Pro & Anatomic Sits Seabass Pro, Clozitt single stay & Anatomic Sits double stay Anatomic Sits double stay User manual 32 Zitzi Delfi Pro... - Page 33 Table size 3 570 x 570 mm 280 x 340 mm Headrest size 2 240 x 190 mm Headrest size 2 long 280 x 210 mm User manual 33 Zitzi Delfi Pro Technical data - Delfi Pro © Anatomic SITT AB...
-
Page 34: Customer Service
51 Eastgate Drive, Little Island, Cork Tel. +353 021 461 8000, Fax +353 021 461 8099 1F-23 & 24, IOI Business Park, MYS-47100 Puchong Tel. +603 8070 9166, Fax +603 8073 9166 Email info@gymncare.com User manual 34 Zitzi Delfi Pro... -
Page 35: Reconditioning
Anatomic SITT AB. Spare parts For the CE marking of the Zitzi Delfi Pro to be valid, the frame may only be fitted with spare parts delivered by Anatomic SITT AB. User manual 35 Zitzi Delfi Pro... -
Page 36: Summary And Follow-Ups
Marking Zitzi Delfi Pro and its accessories are CE marked products. A unique serial num- ber is located on a label placed under the activation housing. This serial number should be quoted in any correspondence regarding the product. -
Page 37: Adaptation And Customization
Adaptation and customization Guidelines and recommendations Every time the Zitzi Delfi Pro is altered in some way, an assessment has to be made to determine if it is an adaptation or a customization. An adaptation is any change made in comprehension of the CE mark. All other changes are customizations. -
Page 38: Terms Of Sale
For products returned more than 150 days from delivery a refund is made of 40% of the invoice value For products returned more than 360 days from delivery no refund is made for the products Customized products cannot be returned User manual 38 Zitzi Delfi Pro... - Page 39 User manual 39 Zitzi Delfi Pro...
- Page 40 Anatomic SITT AB (manufacturer) Box 6137, SE-600 06 Norrköping, Sweden Tel +46 11 16 18 00 Fax +46 11 16 20 05 Support +46 11 16 18 05 Street address Terminalgatan 1, SE-603 61 Norrköping, Sweden Anatomic SITT A/S Viengevej 4, 8240 Risskov, Denmark Tel +45 86 17 01 74 Fax +45 86 17 01 75 Bardum AS...