Connecting Your Dvd Recorder To The Tv Set; Initial Installation - Philips DVDR75/001 Operating Manual

D
Installing your DVD recorder
After successfully connecting your DVD recorder to the TV set and other additional devices as
described in the previous chapters, this chapter will show you how to start the initial installation.
The DVD recorder automatically seeks out and stores all available TV channels.
If you have connected additional devices such as a satellite receiver to the
aerial cable, switch them on. The automatic channel search will recognise it
and save it.
Even if you only want to use the DVD recorder to play back or have only
connected a satellite receiver, you must still complete the initial installation.
This is necessary so that the basic settings are stored correctly. Once initial
installation is complete you can use the DVD recorder as normal.
1
Select the desired language for the on-screen menu by pressing
CH- B or CH+ A .
The multi-language on-screen menu takes the mystery out of using your new
DVD recorder. All settings and/or functions are displayed on your TV screen
in the relevant language.
2
Confirm with OK .
3
Select the desired audio language using CH- B or CH+ A .
The DVD will play the sound in the language you select, provided this
language is available on the disc. If it is not available on the disc the fist
language on the DVD will be used instead. The DVD Video Disc menu, if
available, will also be displayed in the language you select.
4
Confirm with OK .
5
Select the desired language for the subtitles by pressing CH- B or
CH+ A .
The subtitles will be displayed in the language you select, provided this
language is available on the disc. If it is not available on the disc the fist
language on the DVD will be used instead.
6
Confirm with OK .