Duramaxx 10028871 Instructions Manual page 30

4. Exposure
- / + Adjust
5. Burst Mode
OFF > 2 > 3 > 4 (Off = 1 shot only)
6. Shutter / ISO
a AUTO (ISO 100~ ISO 400, It is the defaultand recommended)
b .Fast (Fixed at ISO-200 (Used for very short distance capturing setting at night to avoid
images to be too much white)
7. Date Stamp
a. Off
b. On
Video Mode
You can either use the short-cut key PIC/VIDEO or highlight the Video to change by pressing
MENU key, now the VIDEO mode is selected. The unit will take video clips day or night. Since
a 1st event is recorded, a video-cam icon will appear in the lower scouting LCD showing you
are in video mode.
In case you would switch back for Single Picture mode, just need to turn ON camera by pres-
sing CAM-PW, then press the PIC/VIDEO key simply. Accept the SINGLE Mode. Then, remember
to re-boot the unit by turn off the main PW and back ON. You will see the Video-cam icon to be
disappear. Otherwise, the camera will not work properly.
There are the option items below by pressing DOWN key:
1. To Single
Yes
No
2. Movie Size
a. 1280 x 720 (HD )
b. 720 x 480
c. 640 x 480 (VGA)
3. Frame Rate
a. High
b. Low
Important: Since this unit detects batteries becoming too weak and an blank battery icon ap-
pear, the unit will stop taking any night pictures or video and take day time pictures or video
only.
The system default setting is Single Still Picture Mode for capturing colorful images at day and
monochrome images at night. Once the motion sensor does detect a motion, camera will snap
it into the memory. Scouting counter will renew the reading after each event.
30