Kicker CVX10 Owner's Manual page 3

SEALED ENCLOSURE APPLICATIONS
These sealed enclosure designs give the smoothest response with increased energy at the lowest
frequencies, 20 to 30Hz. These designs deliver massive amounts of highly-accurate bass and can be
driven with punishing levels of amplifi er power.
The CompVX high performance suspension system can operate in a larger sealed enclosure. This
Maximum enclosure volume application is ideal for SQ (ultra sound quality) installations. The Maximum
enclosure generates a very fl at response curve and superbly extends the subbass response.
Sealed Minimum
Model Volume ft
CompVX10 .8 (22.7)
CompVX12 1 (28.3)
CompVX15 1.8 (51)
Panel Dimensions for Sealed Minimum enclosures using 3/4" (1.9cm) thick MDF (See Figure 2)
Model Volume ft
CompVX10 .8 (22.7)
CompVX12 1 (28.32)
CompVX15 1.8 (51)
Figure 2
B
A
2017 CompVX Rev C.indd 3 2017 CompVX Rev C.indd 3
3
(L) Power Handling
600W RMS
750W RMS
1000W RMS
3
(L) Panel A in. (cm)
13.5X13.5 (34.3X34.3)
14.5X14.5 (36.8X36.8)
17.25X17.25 (43.8X43.8)
C
Sealed Maximum
3
Model Volume ft (L)
CompVX10 3 (85)
CompVX12 4.6 (130)
CompVX15 5.2 (147)
Panel B in. (cm) Panel C in. (cm)
13.5X10.125 (34.3X25.7) 12X10.125 (30.5X25.7)
14.5X11 (36.8X27.9) 13X11 (33X27.9)
17.25X13.5 (43.8X34.3) 15.75X13.5 (40X34.3)
CompVX woofers perform well in any size
sealed enclosure between the Minimum
and Maximum volume recommendations.
These systems will exhibit benefi ts of both
designs: Minimum produces high-impact
bass, and Maximum generates low bass
frequency protraction. Overall, the system
will sound more like the recommended
enclosure design it is closest to in
enclosure volume. These enclosure
recommendations have been calculated
with the airspace inside the enclosure and
include the displacement of the woofer.
All sealed-enclosure airspace should be
fi lled to 50% loose poly-fi l (polyester fi berfi ll)
stuffi ng.
Power Handling
300W RMS
300W RMS
500W RMS
3
11/8/2016 2:32:38 PM 11/8/2016 2:32:38 PM