Advertisement
1.0 Installation Instruction
1.1 Installing the Receiver
WARNING: TURN ELECTRICAL POWER OFF AT THE CIRCUIT BEAKER BEFORE BEGINNING THIS
INSTALLATION.
1. Make sure the slide switch on the Remote Receiver is at the OFF position. See Figure 1.
F igure 1
2. Connect the leads to the millivolt generator and the main burner to the output cable of the Remote
Receiver as shown in Figure 2.
3. Installing the Remote Receiver to a Wall Mount:
_
Secure the Remote Receiver to the wall mount.
_
Use the screws provided to secure the face blade to the Remote Receiver. See Figure 4.
Ins tallation of the
R ec eiver to a
J unc tion B ox
4. Installing the Remote Receiver to a Fireplace:
_
Secure the Fireplace Mounting plate to the base pan of the fireplace.
_
Slide the Remote Receiver into the fireplace mounting plate. See Figure 4.
5. Put the switch cap to the slide switch.
6. Slide the battery compartment into the Remote Receiver. See Figure 5.
OF F
Figure 3
Figure 5
R emote
R ecei ver
F igure 2
page 2 of 4
Ma in
B urner
Mil liv ol t
gener a tor
Figure 4
Heat - S hi eld
Insul a tor
R emote
R eceiver
Figure 6
MODEL L VERSION: A
Advertisement
