Remote Control Setup 7 - Philips SVD100 Owner's Manual

Putting Batteries in the Remote Control
1
Remove the battery compartment lid on the bottom of the
remote control by pressing the tab, then lifting the lid.
2
Place two AA batteries inside the battery compartment
with their + and – ends aligned as indicated.
3
Replace the battery compartment lid.
Using the Remote Control
Point the remote control at the DVD Player's remote sensor
(see page 14) when using the remote control to operate the
DVD Player.
Do not put objects between the remote control and the DVD
Player.
Recycling Guidelines/Battery Safety
Your new product and its packaging contain materials that can be
recycled and reused. Specialized companies can recycle your product
to increase the amount that needs to be properly disposed.
Your product uses batteries that should not be thrown away when
depleted but should be disposed of as small chemical waste. Please
find out about the local regulations on disposal of your old product,
batteries, and packaging whenever you replace existing equipment.

Remote Control Setup 7

Helpful Hints
• The remote control and its batteries
are supplied.
• Do not mix alkaline and man-
ganese batteries.
• Do not mix old and new batteries.
1
2
3