Table of Contents
Advertisement
MDV450
25/09/2002
9:46 AM
AUDIO CD
DVD
There are many playback features and options available on Discs. After
familiarizing yourself with the DVD Player as described on pages 16-18, see
pages 19 and following to try additional playback features.
1
Press the POWER button to turn on the DVD Player.
Turn on your TV. Set it to the correct Video In channel. You
should see the DVD screen saver on the TV (if no Disc is in the
Player).
2
Press OPEN/CLOSE / on the front of the DVD Player to open
the disc tray.
Load your Disc in the tray, with the label facing up. If the Disc
(DVD) is two-sided, make sure the label of the side you want to play
is facing up.
3
Press OPEN/CLOSE / again to close the tray.
4
Playback may start automatically. If not:
• If you are playing a DVD, a Disc menu may appear. If the Title or
Chapter selections are numbered, press a Number button to select
an item. Or, press 341 2 to select an item, then press OK. Playback
will begin. Or, follow the on-screen instructions as detailed in the
DVD Disc menu.
• If you are playing an Audio CD, press PLAY
• If you are playing a Video CD that has Playback Control, press the
DISC MENU button to access the menu or index of the Video CD.
Press the Previous
to select an item, then press OK. Follow the instructions provided
by the Video CD. Not all Video CDs have Playback Control. See the
Disc case or menus for details.
5
To stop playback at any time, press STOP
7 7
If you press STOP
point if you press PLAY
the Resume feature.
7 7
If you press STOP
at the beginning of the Disc again if you press PLAY
restart playback.
Page 15
VIDEO CD
3 3
to start playback.
4
¢
, Next
, 3, 4, 1, 2, or Number buttons
7 7
.
only once, playback will resume at the same
3 3
later to restart playback.This is known as
more than once to stop playback, play will start
Quick Disc Playback 15
2,3
5
4
3 3
later to
1
4
Helpful Hints
• If the Disc is locked by Parental
Controls, you must enter your
password or unlock the Disc.
Details are on pages 27-29.
• DVDs have a region code.Your
Player will not play Discs that
have a region code different from
the region code of your Player.
The Player's region code is 1
(one). Details are on page 7.
• Opening the disc tray or turning
off the DVD Player's power may
cancel the Resume feature.
Advertisement
Table of Contents
