Table of Contents
Advertisement
MDV450
25/09/2002
9:46 AM
10 Hookups (cont'd)
2
Back of TV
(example only)
RIGHT AUDIO IN
LEFT AUDIO IN
VIDEO IN
1
Connect the yellow VIDEO (VIDEO OUT) jack of the DVD
Player to the corresponding VIDEO IN jack on your TV. Use
the supplied video cable.
2
Connect the supplied audio cable to the red and white
AUDIO OUT (left and right) jacks on the DVD Player and
to the left/right AUDIO IN jacks on the TV. Match the cable
colors to the jack colors.
3
Plug the power cords of the DVD Player and the TV into an
active power outlet. Press the POWER ON/OFF button on
the front of the DVD Player to turn on the DVD Player.
4
Turn on the TV power. Set the TV to the correct Video In
channel. See your TV owner's manual for details. Or, change
channels at the TV until you see the DVD screen saver on the TV.
Page 10
Connecting to a TV Only
TV has a yellow CVBS Video In jack
RIGHT AUDIO IN
LEFT AUDIO IN
S-VIDEO IN
1
3
Helpful Hint
• On the TV, the Video In jack is
usually yellow and might be
labeled video, CVBS, composite,
or baseband.
Advertisement
Table of Contents
