Table of Contents
Advertisement
Quick Links
INSTRUCTIONS FOR
Combined Stud Detector
& Distance Estimator
Stock No.88988 Part No.DMSD
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE SAFE AND
EFFECTIVE USE OF THIS PRODUCT.
GENERAL INFORMATION
Read all these instructions before operating this product and save these instructions.
This manual has been compiled by Draper Tools and is an integrated part of the product with which it is enclosed and
should be kept with it for future references.
This manual describes the purpose for which the product has been designed and contains all the necessary information
to ensure its correct and safe use. We recommend that this manual is read before any operation or, before performing
any kind of adjustment to the product and prior to any maintenance tasks. By following all the general safety instructions
contained in this manual, it will ensure both product and operator safety, together with longer life of the product itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.
Whilst every effort has been made to ensure accuracy of information contained in this manual, the Draper Tools policy of
continuous improvement determines the right to make modifications without prior warning.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Draper DMSD
Summary of Contents for Draper DMSD
-
Page 1: General Information
Read all these instructions before operating this product and save these instructions. This manual has been compiled by Draper Tools and is an integrated part of the product with which it is enclosed and should be kept with it for future references. - Page 2 ..........................2 Operation and Use ........................... 3-4 Disposal ..............................5 Explanation of Symbols/Pictograms ......................5 DECLARATION OF CONFORMITY Draper Tools Ltd., Hursley Road, Chandler’s Ford, Eastleigh, Hampshire. SO53 1YF. England. Declare under our sole responsibility that the product: Stock No:- 88988.
- Page 3 SPECIFICATION The Draper Tools policy of continuous improvement determines the right to change specification without notice. Stock No.......................... 88988 Part No..........................DMSD Detection Distance: Stud ........................19.05mm Distance ......................0.60-15.24M Accuracy ......................±0.5% ±1 Digit Resolution ........................0.01M (1") Aperture Angle (approx.) ......................
- Page 4 OPERATION AND USE - STUD DETECTOR: (FIG.2) FIG.2 Place the detector flat against the wall. Press and hold button to calibrate the unit. The buzzer will sound to confirm and the display will read 'Stud'. NOTE: If by chance, the calibration is carried out too close or over a stud the detector will never pick up any readings, and give false information.
- Page 5 OPERATION AND USE 1. TO TAKE STANDARD MEASUREMENTS: Press button to take the measurement. The result will be displayed unless an error has occurred in which case try again. 2. TO ADD RESULTS: (without using the memory) Press button to take the measurement. Press button to enter the addition mode.
- Page 6 DISPOSAL OF POWER TOOLS - At the end of the machine‘s working life, or when it can no longer be repaired, ensure that it is disposed of according to national regulations. - Contact your local authority for details of collection schemes in your area. In all circumstances: •...
- Page 7 NOTES - 6 -...
- Page 8 - Sales Desk: (023) 8049 4333 - General Enquiries: (023) 8026 6355 - Service/Warranty Repair Agent For aftersales servicing or warranty repairs, please contact the Draper Tools Helpline for details of an agent in your local area. YOUR DRAPER STOCKIST PJMC0316...
Need help?
Do you have a question about the DMSD and is the answer not in the manual?
Questions and answers