Page 17
SB X50e AC 240V/50Hz COAXIAL OPTICAL sound bar with wireless subwoofer Model:CY-916ADB Power input: AC 240V/50Hz Subwoofer 50W + sound bar 25Wx2 POWER AC 240V/50Hz...
Page 23
SB X50e COAXIAL OPTICAL COAXIAL Woofer Rear-L Front-L Center Rear-R Front-R Video Audio Out Video Out AC 100V~240V Scart out Manufactured under license from Dolby Laboratories. WARNING 50/60Hz "Doldy","Dolby Digital", and the double-D symbol are RISK OF ELECTRIC SHOCK Woofer...
SB X50e Important Safety Instructions Important Safety Instructions Caution: To reduce the risk of electric shock, do not dismantle the product and do not expose the apparatus to rain or moisture. No user-serviceable parts inside. Refer servicing to qualified personnel only.
Brand name: Blaupunkt Responsible party: M3 Electronic GmbH Gutenbergstrasse 5, D-65830 Kriftel. Germany Hereby, Blaupunkt Competence Center Audio M3 Electronic GmbH, declares that this Class 1 equipment is in compliance with the essential requirement and other relevant provisions of Directive 1999/5/EC.
Page 39
SB X50e Heat - The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products, including amplifiers that produce heat. No naked flame sources, such as lighted candles, should be placed on the apparatus.
Page 40
SB X50e The only means of completely disconnecting the product from the power supply is by removing the power cord from the wall outlet or the product. The wall outlet or the power cord entry to the product must remain freely accessible at all times while the product is in use.
Page 41
SB X50e If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. Before operating this system, check the voltage of this system to see if it is identical to the voltage of your local power supply.
SB X50e Controls and Functions Front STANDBY: Power Standby Button. INPUT: Audio input source selection button. LED Display. VOL-: Volume Downward Adjustment Button. VOL+: Volume Upward Adjustment Button. STANDBY: Subwoofer Standby Input Indicator. (The LED will turn to red color in standby mode, and when the subwoofer is...
Page 43
SB X50e Rear AC 240V/50Hz COAXIAL OPTICAL sound bar with wireless subwoofer Model:CY-916ADB Power input: AC 240V/50Hz Subwoofer 50W + sound bar 25Wx2 POWER AC 240V/50Hz AC Power Cord. (SOUND BAR) CD Stereo Left channel Input. CD Stereo Right channel Input.
SB X50e Remote Control Remote control graphics STANDBY: Power Standby. MUSIC: ideal output mode for music playback sound effect. NORMAL: by-pass sound output. PREV.: Previous track selection on Bluetooth mode. NEXT.: Next track selection on Bluetooth mode. VOL-: Volume Downward Adjustment Button.
SB X50e STOP: Press stop button to disconnect the Bluetooth pairing with other device. VOL+: Volume Upward Adjustment Button. BASS+: Bass Upward Adjustment Button. TREBLE+: Treble Upward Adjustment Button. Remote Control Battery Replacement Replace the remote control battery when it no longer operates the unit, otherwise the operating range and battery lifetime will be reduced considerably.
Page 46
SB X50e Wireless Operation Guide If there is no sound from the subwoofer while the sound bar is used together with the subwoofer. Or if noise or no-sound arise when two or more than two units are being used at the same time (because of the electromagnetic disturbance caused by the same product frequency) these problems can be solved by following procedures: Switch off the power of the sound bar and the subwoofer.
SB X50e System Connection Instructions Video In To Stereo Output OPTICAL OUT RCA Cable COAXIAL OPTICAL COAXIAL Rear-L Front-L Woofer Video Out Center Rear-R Front-R Video Audio Out Audio Out Video Out AC 100V~240V Scart out Manufactured under license from Dolby Laboratories.
Page 48
Bluetooth capable device to connect with the Sound bar. The sound will be delivered from the sound bar when your Bluetooth capable device is connected to the SB X50e. You can press PREV and NEXT button to achieve previous and next tracking selection during Bluetooth playing mode;...
SB X50e Troubleshooting a. Please check if the power plug is properly and tight connected with power socket. The sound bar cannot b. Please try to press the standby button on remote control. power on. c. Please check if you have switched on the power on the rear panel of subwoofer.
SB X50e Specifications Power Supply: AC 220~240V/50Hz Total Power Output: 100 Watt RMS, THD 10% Subwoofer Power Output: 50 Watt RMS,THD 10% Sound bar Power Output: 2 x 25 Watt RMS,THD 10% Input Sensitivity (Subwoofer): 300mV 20mV Input Sensitivity (Sound bar): 750mV 50mV...
Page 51
There are separate collection systems for recycling in the EU. For more information, please contact the local authority or your retailer where you purchased the product. All rights reserved by Blaupunkt Competence Center Audio M3 Electronic GmbH. This material may be reproduced, copied or distributed for personal use only.
Need help?
Do you have a question about the SB X50e and is the answer not in the manual?
Questions and answers