Table of Contents
Advertisement
Switching the system on/off
●
Press STANDBY -ONB (B on the remote).
➜
"HELLO" is displayed briefly. The system will
switch to the last selected source.
●
Press DISC, TUNER or AUX on the remote.
➜
The system will switch to the selected source.
To switch the system to standby mode
●
Press STANDBY -ONB (Bon the remote).
➜
"BYE BYE" is displayed briefly. The interactive
sound settings, last selected source and tuner
presets will be retained in the player's memory.
Power-saving automatic standby
As a power-saving feature, the system will
automatically switch to Standby mode if you do
not press any buttons within 15 minutes after a
disc has stopped playing.
Volume control
Turn VOLUME (-/+) clockwise or anticlockwise
(or press VOL +/- on the remote) to increase
or decrease the volume level.
➜
"VOL XX" is displayed on the display panel.
"XX" denotes the volume level.
To switch off the volume temporarily
●
Press MUTE on the remote.
➜
Playback will continue without sound and
"MUTING" flashes.
●
To activate sound reproduction, you can:
– press MUTE again;
– adjust the volume controls;
– change source.
Sound control
DBB, DSC, LOUDNESS and DVS sound
features cannot be activated at the same
time.
DBB (Dynamic Bass Boost)
DBB enhances the bass response.
●
Press DBB on the remote repeatedly to select
DBB ON or DBB OFF.
➜
Some discs might be recorded in high
modulation, which causes a distortion at high
volume. If this occurs, switch off DBB or reduce
the volume.
Basic Operations
DSC (Digital Sound Control)
DSC provides a different type of preset sound
equalizer setting.
●
Press DSC on the system or remote control
repeatedly to select: FLAT, POPS, JAZZ, CLASSIC
or ROCK.
LOUDNESS
LOUDNESS feature enables the system to
automatically increase the treble and bass sound
effect at low volume (the higher the volume, the
lower the treble and bass increase).
●
Press LOUDNESS on the remote control to
enable or disable LOUDNESS feature.
➜
icon appears/disappears after this feature
is enabled/disabled.
DVS
DVS (Dolby Virtual Speaker) technology creates
a highly compelling 5.1-channel listening
experience from as few as two speakers, making
it an ideal entertainment solution for locations
where space for multiple speaker setup is limited.
DVS feature enables you to switch between the
surround sound mode and ordinary music
mode.
Music mode
●
Press MOVING SPEAKES to switch between
the surround sound mode and ordinary music
mode.
➜
When the surround sound mode is enabled,
a "DVS" icon will appear on the display panel and
the top parts of the left and right front speakers
will swivel sideways to achieve the moving
surround effect.
➜
When the surround sound mode is disabled,
the "DVS" icon will disappear from the display
panel and the top parts of the left and right front
speakers will return to their previous positions
to resume the ordinary music mode.
Surround mode
21
Advertisement
Table of Contents
