Blusens H305 User Manual page 89

Computer no
- Signal cable is loose or
display, and
fallen off.
prompt no
signal input, red
indicator LED
twinkling
Remote control - Receive window of remote
distance is control was covered by
short, lose objects.
control - The battery energy of
remote control is too low.
Computer - Adjustment is incorrect.
display is faint - Display mode is incorrect.
Computer - Adjustment is incorrect.
display image
- Display mode is incorrect.
does not fill the
screen
Noise signals al - Electrical release at turning
turning off off.
Can not operate
- Exterior influence, for
this machine example lightning, static
electricity and so on, which
are possibly to disturb the
normal operation of this
machine.
Blusens H305
- Check signal cable whether
or not loose, fall off, reconnect
again.
- Remove objets obstructing
the receiver window of remote
control.
- Change battery.
- Use auto-adjustment function.
- Use recommended mode.
- Use auto-adjustment function.
- Enter PICTURE to adjust
horizontal or vertical position.
- Use recommended mode.
- It is normal.
- Press button to turn off
electrical source, then press
button to turn on the TV again
after 1-2 minutes.
43