Blusens H305 User Manual page 67

Standby
Press POWER key on the remote control and your TV will be in
Standby.
ATTENTION:
 1. TV set will automatically turn to standby if there is no signal input
for 5 minutes when the TV turns on.
 2. TV set will automatically turn to standby when the preset time for
turning off is reached.
 3. If you do not use it for a long time, please turn off the power supply
for the machine. Do not let the machine work in standby state for a long
time.
3.2. Signal Source Selection
Press INPUT on the remote control and use the
keys or CH+/CH- key to select the signal
/
source (AV, HDMI, VGA, SCART, USB, YPbPr) or
choose DTV to enter the digital TV. Press OK to
confirm your choice.
3.3. DTV Mode Operations
Use the CH+ or CH- buttons to tune the desired channel, or enter the
channel number directly using the numeric keypad. Press OK to screen display
the TV and Radio channel list (press the
and display only DTV channels, ATV channels, Radio channels, etc.).
Use AUDIO button to select audio language broadcasting, SUBTITLE to
show or hide subtitles on the screen and FAV to see the list of your favorite
channels.
Blusens H305 Blusens H305
and buttons to sort by groups
21 21