Page 2
Congratula/ons on your choice of LEDX headlamp The lamp has been developed with a focus on bright light, low weight and several different fields of use. Be careful; the light is very powerful, do not look straight into the lamp when ...
Page 3
The lamp case Connect the baNery to the lamp case. Be careful to fit the white markings on the contacts to each other; if they are incorrectly fiNed and forced together the contact pins might break. Right ...
Page 4
gear. The back-‐up baNery is completely waterproof. It gives light for about 80 min with 6 % power. The lamp recognizes that the back-‐up baNery is connected and you cannot up the effect. Both ba@eries must be kept cool and dry, if you store the baNery in the refrigerator, place it in an airOght box or plasOc bag to prevent condensaOon ...
Page 5
The main baNery is charged with the larger charger and takes about 4 hours to charge fully. Do not discharge the baNery before recharging. The backup baNery is charged with the liNle charger and takes about 3 hours to recharge.
Page 6
Headgear The headgear is controlled by Velcro and can easily be adjusted. It also comes with mulOple fiCng points for the cable from the lamp case and its plug, and for the cable from the main baNery that is threaded through a loop before it connects to the lamp case.
Page 7
Specifica/on: Lamp housing with 8 LED Cree XM-‐L U3 and 3 different types of lenses and 1 reflector. The lenses and the reflector spreads the light between 13° -‐ 79° FWHM. Weight: Lamp housing 130 g Lamp housing with the headgear of 173 g ...
Page 8
Warranty 1 year warranty against manufacturing defects on LEDX Cobra 6 500 Connect only the supplied LEDX baNeries to the lamp. Only charge baNeries with the supplied charger from LEDX. ...
Need help?
Do you have a question about the Cobra 6 500 and is the answer not in the manual?
Questions and answers