Get Started; Connect Speakers; Connect Fm Antenna; Connect Audio Cables - Philips MCD355 User Manual

3 Get started

Caution
• Use of controls or adjustments or
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
back of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________

Connect speakers

Note
•
Ensure that the colors of the speaker wires
and terminals are matched.
1
Hold down the socket fl ap.
2
Insert the stripped part of the wire
completely.
• Insert the right speaker wires to
"Right L/Right H", left speaker wires
to "Left L/Left H".
• Insert the red/blue wires to "
black wires to " -".
3
Release the socket fl ap.
4
Connect the subwoofer to
"SUBWOOFER OUT" socket.
a b
Speaker
(Right)

Connect FM antenna

1
+",

Connect audio cables

To hear audio from other audio devices as well
as the accompanied speakers, select a preferred
audio connection:
c
Speaker
(Left)
HIGH CH
Right L
Left L
Right H
Left H
LOW CH
SPEAKERS 6Ω
Connect the supplied FM antenna to the
FM AERIAL jack on the main unit.
FM aerial
• Option 1: connect a coaxial cable
• Option 2: connect analog audio
cables
EN 11