Dell N1500 Series Getting Started Manual page 230

automatically assigns the highest access level
[Privilege Level 15] to this account. You can use Dell
Network Manager or other management interfaces to
change this setting, and to add additional management
system information later. For more information on
adding management systems, see the user documentation.
To add a management station:
Please enter the SNMP community string to be used.
[public]: public
NOT:
Yapılandırılmış ise, varsayılan erişim seviyesi, SNMP yönetim
arabirimi için mevcut en yüksek erişime ayarlanır. İlk olarak yalnızca
SNMPv2 etkinleştirilecektir. SNMPv3, SNMPv3 (örn. motor Kimliği, görüntü,
vb.) yapılandırma güvenlik erişimine döndüğünüz ana kadar geçersiz kılınır.
Please enter the IP address of the Management System
(A.B.C.D) or wildcard (0.0.0.0) to manage from any
Management Station. [0.0.0.0]: 10.1.2.100
Step 2:
Now we need to set up your initial privilege (Level
15) user account. This account is used to login to the
CLI and Web interface. You may set up other accounts
and change privilege levels later. For more
information on setting up user accounts and changing
privilege levels, see the user documentation.
To set up a user account:
Please enter the user name. [root]:admin
Please enter the user password: ********
Please reenter the user password: ********
Step 3:
Next, an IP address is set up on the VLAN 1 routing
interface.
You can use the IP address to access the CLI, Web
interface, or SNMP interface of the switch.
230
Başlangıç Kılavuzu