Important remarks
One should track environmental conditions during experiments:
- Shifts in relative humidity should not exceed 5%.
- Shifts in air temperature should not exceed 5 ºС.
- During experiments, do not turn on/off electrical devices within the room where the
Bio-Well device is operating.
- Do not use cell phones near the Bio-Well device or Sputnik.
- The number of people in the room should be the same during the entire experiment.
- Do not take measurements during strong atmospheric changes.
- Be aware of changes in geomagnetic background (e.g. Sun and Moon rise/recess).
For general finger scans:
- Clean the person's fingers with a soft cloth before taking the reading, especially
to at least wipe any hand lotion off the fingers.
- Clean the optical glass after every person using soft cloth.
-
If light is preventing clean scans, reposition the fingers lower within the Bio-
Well device, especially the little finger (sometimes light comes in under the
finger).
•
•
•
20
Need help?
Do you have a question about the Bio-Well and is the answer not in the manual?
Questions and answers