Motorola CLIQ2 Start Manual page 19

To save an in-range Wi-Fi network:
Note: If the Wi-Fi radio is already turned on, turn it
off before adding a new network. See To turn Wi-Fi
radio on / off on page 33.
1. From any Home screen, tap
the Application Tray icon.
2. Tap Wi-Fi Calling.
3. Tap Wi-Fi settings.
4. Select the Wi-Fi check box.
5. Tap the network you want to add.
6. If necessary, enter the password.
7. Tap Connect.
8. Tap the Back key.
9. When the Wi-Fi
connection is
successful, the Wi-Fi
Calling screen will say
Ready! and the Wi-Fi
Calling icon appears
on the Status bar.
10. You can now make calls
and send messages
as you would normally.
As long as the Wi-Fi
Calling icon remains
on the Status bar, you
are communicating
over Wi-Fi.
30
IMPORTANT: To stay on a Wi-Fi call, remain
in the range of the Wi-Fi network. You'll get
an audible beep and screen message letting
you know when a call may drop as you leave
the Wi-Fi range.
To save an out-of-range Wi-Fi
network:
Note: If the Wi-Fi radio is already turned on, turn it
off before adding a new network. See To turn Wi-Fi
radio on / off on page 33.
1. From any Home screen, tap
the Application Tray icon.
2. Tap Wi-Fi Calling.
3. Tap Wi-Fi Settings.
4. Tap to select the Wi-Fi check
box to turn Wi-Fi on.
5. Scroll to the bottom and tap
Add Wi-Fi network.
6. Enter the Network SSID.
7. Tap the Security drop-down menu
and tap the network security type.
8. If necessary, enter the password.
9. Tap Save.
31