Table of Contents
Advertisement
COMPLY™ TIP INSTRUCTIONS
For the rubber "mushroom cap" style tips, use a twisting motion to
insert the tip into the appropriate ear canal (L = left, R = right), deep
enough to create a full seal. If you cannot create a full seal, try using
different size tips.
With both earpieces inserted, check the sound quality by playing
music through the 3D system. We recommend starting with the
volume turned all the way down. With the correct ear tips and full
insertion, your 3D-U should be very comfortable and sound fantastic!
If the sound is thin and lacks bass, you have not achieved a full seal.
Keep experimenting until you find the tip that's right for you. If you're
not sure, try the free Sensaphonics Seal Test on our website.
INSERTING CUSTOM EARPHONES
Your customer 3D Earphones are made of soft, flexible silicone
for a secure fit. They need to be fully inserted deep into your ear
canals to attain the tight seal they were designed to achieve.
With a little practice, inserting your 3D Earphones will become
quick and easy. Just follow these simple steps. (Note: Earphones
shown in photos are Sensaphonics ProPhonic 2X-S.)
STEP 1
Hold the earpiece with the red
or blue dot on top (blue dot =
left ear, red = right). The cables
will run over and behind your ears.
6
STEP 2
Place the canal portion
of the earpiece into your
ear canal.
Advertisement
Table of Contents
