Table of Contents
Advertisement
Internal CPU Power Management
The subitems in this menu allow you to set the CPU ratio and features.
Intel(R) SpeedStep(tm) [Auto]
Allows the operating system to dynamically adjust the processor voltage and cores
frequency to decrease the average power consumption and decrease average heat
production. Configuration options: [Auto] [Enabled] [Disabled]
Turbo Mode [Enabled]
Allows you to enable your processor cores to run faster than the base operating
frequency when it is below power, current and specification limit. Configuration options:
[Disabled] [Enabled]
The following items appear only when you set the Turbo Mode to [Enabled].
IA AC Load Line [Auto]
This item allows you to set the AC loadline defined in 1/100 mOhms. Use the <+> and
<-> keys to adjust the value.
Configuration options: [Auto] [0.01] - [62.49]
IA DC Load Line [Auto]
This item allows you to set the DC loadline defined in 1/100 mOhms. Use the <+> and
<-> keys to adjust the value.
Configuration options: [Auto] [0.01] - [62.49]
4-22
Turbo Mode Parameters
Long Duration Package Power Limit [Auto]
Allows you to limit the Turbo Ratio's time duration that exceeds the TDP
(Thermal Design Power) for maximum performance. Use the <+> and <->
keys to adjust the value.
Configuration options: [Auto] [1] - [4095]
Package Power Time Window [Auto]
Also known as Power Limit 1, and allows you to maintain the time window
for Turbo Ratio over TDP (Thermal Design Power). Use the <+> and <->
keys to adjust the value.
Configuration options: [Auto] [1] - [127]
Short Duration Package Power Limit [Auto]
Also known as Power Limit 2, and allows you to provide rapid protection
when the package power exceeds the Power Limit 1. Use the <+> and <->
keys to adjust the value.
Configuration options: [Auto] [1] - [4095]
Chapter 4: BIOS Setup
Advertisement
Table of Contents
