Table of Contents
Advertisement
4.
Prepare the 5.25-inch drive.
5.
Insert and carefully push the drive into
the bay until its screw holes align with
the holes on the bay.
6.
Push the bay locks to secure the drive in
place.
7.
Connect the SATA cable to the SATA
connector of the drive.
8.
Connect a SATA power cable from the
power supply to the power connector of
the drive.
9.
Reinstall the front panel cover.
2-12
Bay locks
SATA power cable
Chapter 2: Hardware Setup
SATA cable
Advertisement
Table of Contents
