Table of Contents
Advertisement
CUSTOMIZING SETTINGS
52
NETWORK
To connect to the network [Depending on model]
SETTINGS> NETWORK> Network Setting
Set IP Mode to IP Auto Setting or IP Manual Setting.
IP Auto Setting
Select this mode if your Internet service is broadband.
IP Manual Setting
Select this mode if you are using the Internet in an office (for example, fixed IP).
If you select IP Manual Setting, type in the IP address.
Select OK to connect to the network.
Setting a network - warning
Use a standard LAN cable (Cat5 or higher with RJ45 connector, 10 Base-T or 100 Base TX LAN
y
port).
Resetting your modem can cause network connection problems. To resolve the problem, turn the
y
power off, disconnect and reconnect, and then turn the power back on.
LG Electronics is not responsible for any Internet connection problems or any faults, malfunctions
y
and errors caused by an Internet connection.
A network connection may not work properly depending on the Internet service provider.
y
A DSL modem is required for a DSL service; a cable modem is required for a cable service. Only
y
a limited number of Internet connections may be available, and TV network setting may not be
available depending on your contract with your Internet Service Provider (ISP). (If only one device is
allowed per line and the PC is already connected, other devices cannot be used.)
If you do not turn off the entire local home network, network traffic may occur on some devices.
y
Invalid settings on network devices can cause the TV to run slowly or not operate properly. Install
y
the devices correctly according to the appropriate manual and set the network.
SETTINGS> NETWORK> Network Status
Display the network status.
- Internet is connected : Externally connected
- Network is connected : Only internally connected
- Not connected : When there is no network connection
NETWORK
Advertisement
Table of Contents
