Table of Contents
Advertisement
Programming disc tracks (not for
Picture CD/MP3/SACD)
You can play the contents of the disc in
the order you want by programming the
playing order of the tracks. Up to 20
tracks can be stored.
1
Press PROG on the remote.
OR
In 'General Setup Page', use 34 keys to
highlight { Program }, then press 2 to
select { Input Menu }.
2
Press OK to confirm.
2
Exit
To programme your favourite tracks/
chapter
3
Use the numeric keypad (0-9) to enter
a valid track/chapter number.
4
Use 1 2 3 4 keys to move the cursor to
the next position.
➜
If the total programme tracks are
more than ten, press T to open the
next page and proceed with programming
or,
➜
Use 1 2 3 4 keys to highlight
{ Next } on the programme menu, then
press OK.
5
3
4
Repeat steps
~
track/chapter number.
TIPS:
The underlined option is the factory default setting.
To return to the previous menu, press 1. To remove the menu, press SETUP.
001-051-hts5310S-75-Eng6
DVD Setup Menu Options
6
7
8
9
6
7
8
9
10
Start
Next
to input another
31
If you want to remove a track
Use 1 2 3 4 keys to move the cursor to
the track you want to remove.
Press OK to remove this track from the
programme menu.
To start programme playback
Use 1 2 3 4 keys to highlight { Start }
on the programme menu, then press OK.
➜
Playback will start with the selected
tracks under the programmed sequence.
To exit programme playback
Use 1 2 3 4 keys to highlight { Exit } on
the programme menu, then press OK.
OSD Language
This menu contains various language
options for the language displayed on the
screen. For details, see page 20.
15/06/05, 1:20 PM
(continued)
31
Advertisement
Table of Contents
