Aligning The Laser - ikeGPS SPIKE Quick Start Manual

Aligning the Laser

Before using your Spike, you need to ensure that the laser is aligned with
the camera on your Smartphone.
1 In the Spike app, tap on
2 Hold your Smartphone vertically and aim
it towards two objects that are at different
distances, for example the edge of a
door. Ensure that the closest object has a
vertical edge.
• The distance between the two objects should be
at least 15 feet (5 meters).
• You can use the vertical edge of an open door
and the wall of the room behind it.
3 Slowly move your Smartphone sideways
and check that the distance measurement
changes when the crosshair in the center
of the screen moves on and off the vertical
edge.
4 If the measurement changes at the point
where the crosshair moves on and off
the vertical edge, your laser is correctly
aligned. If this does not happen at the
correct point, tap on the left and right blue
arrows to adjust to the correct point.
5 Turn your Smartphone horizontally and
aiming at the same two objects, repeat
steps 3 and 4 to align the laser
horizontally.
, then tap Align Laser.
Spike Quick Start Guide 6