Motorola P100 Series Quick Reference Manual page 6

Button Function
Keypad Locks or unlocks all
Lock buttons except PTT,
Side Programmable
Button 1, Side
Programmable
Button 2 and ON/
OFF/Volume Knob.
Applicable for Long
Press only.
Nuisance Removes unwanted
Channel channel(s)
Delete temporarily from
scan list during Scan.
Applicable for Long
Press only.
Phone Enables or disables
Mode Phone feature for the
selected channel.
TPL/DPL Enables or disables
Enable radio from requiring
matching TPL/DPL
to unsquelch.
Prime Enables quick move
Channel to the selected Prime
Channel.
English
Button
PTT ID
Enable
Reverse
Burst
Scrambling
Code
Select
Scrambling
Enable/
Disable
Squelch
Level
Unassigned
VOX
4
Function
Enables or disables
PTT ID sent on PTT
press.
Selects the Reverse
Burst Type: None,
180 or 240.
Toggles between the
two scrambling
codes available.
Enables or disables
Voice Inversion
Scrambling feature
for the selected
channel. Applicable
for Long Press only.
Selects desired
squelch level:
Normal or Tight.
No function is
programmed to this
button.
Enables or disables
VOX feature for the
selected channel.
Button Function
Sticky Toggles the
Monitor permanent monitor
function until button
is pressed again.
Applicable for Long
Press only.
Talkaround/ Enables toggle
Repeater between repeater
Mode and talkaround mode
operations.
Volume Set Controls audio level.
Button emits
continuous tone to
indicate current
volume level. To
change volume level,
turn volume knob to
desired level while
pressing
programmable
button. Applicable for
Long Press only.