Advertisement
1
Connect
A
Placement
Proper speakers system placement is important to
ensure optimum sound performance.
A
Place the center speaker above or close to the TV.
B
Place the subwoofer on the floor, at least one meter
away from the TV.
C
Place the front speakers at equal distances from the
TV.
D
Place the rear speakers at normal listening ear level.
B
Connect the main unit to TV
Television
( rear)
VIDEO IN
(CVBS)
VIDEO IN
(CVBS)
DOCK
VIDEO OUT
Pr
Y
Main Unit (rear)
Pb
COAXIAL
S-VIDEO
Connect a composite video cable (supplied) from the
CVBS jack on the main unit to the VIDEO IN jack on
your TV.
Note It is important to connect the main unit
directly to your TV.
hts3545_37qsg_eng2.indd 2
hts3545_37qsg_eng2.indd 2
C
Connect the speakers and
subwoofer
Connect the various colored plugs from the speakers
and subwoofer to the same colored jacks at the rear of
the main unit.
SUBWOOFER
FRONT CENTER
REAR
REAR
FRONT
RIGHT
LEFT
LEFT
FRONT
RIGHT
Main Unit (rear)
SIRIUS
D
Connect the radio antennas and
power cable
Keep the antennas away from the electronic devices to
prevent unwanted interference.
FM antenna
A
Main Unit (rear)
SIRIUS
B
AM/MW antenna
A
Connect the FM antenna to the inner pin of the
FM 75
jack. Extend the wire for optimum
reception.
B
Unfold the AM/MW loop antenna (not supplied) and
fix the claw into the slot. Push the tabs and insert
the wires into the AM/MW jacks.
C
Connect the power cable from the main unit to the
AC power outlet.
E
Connect audio output from TV
(optional)
To hear the TV audio through this home theater system,
use a red and white audio cables (not supplied) to
connect the AUDIO IN-TV jacks on the main unit to the
AUDIO OUT jacks on your TV.
AUDIO
Television
OUT
( rear)
AUDIO OUT
AUDIO
OUT
AUDIO IN
Main Unit (rear)
Note When watching the TV programs, you can
press TV on the remote control to get the sound
output from the speakers.
2
Set up
A
Finding the viewing channel
Press 2 (STANDBY ON) on the main unit to turn
A
it on.
B
Turn on the TV. Use the TVs remote control to
select the correct viewing channel.
STANDBY-ON
Note To search for the correct viewing channel,
press the Channel Down button on the TVs remote
°
control repeatedly (or AV, SELECT,
button) until
you see the Video In channel. If you are using a RF
modulator, set the TV to channel 3 or 4.
B
Select the display language on the
screen
A
Press SETUP.
The { General Setup Page } appears.
General Setup Page
Disc Lock
Display Dim
Program
OSD Language
English
Screen Saver
Espanõl
Sleep
Français
SETUP
DivX(R) VOD Code
B
Press
to select { OSD Language } and press
.
C
Use
keys to select a language option in the
menu and press OK to confirm.
D
Press SETUP to exit.
Note The language set here is only for the menus
that are shown on the TV while operating this Home
Theater system, not for the DVD disc menu.
There are various setup options (Audio Setup, Video
Setup, Preference Setup) available on this Home Theater
System. Refer to the user manual for more information.
2007-04-30 3:24:56 PM
2007-04-30 3:24:56 PM
Advertisement
