Automatic Presetting; Manual Presetting; Selecting A Preset Radio Station; Deleting A Preset Radio Station - Philips HTS3500S/93 User Manual

Automatic presetting

Use automatic presetting to store or
reinstall all the preset radio stations.
1
Press TUNER on the remote to select
"FM" or "MW".
2
Press and hold PROG until "START ..."
appears.
➜
All the former presets will be
overwritten.

Manual presetting

Use manual presetting to store only your
favourite radio stations.
1
Tune to your desired radio station (see
"Tuning to radio stations").
2
Press PROG.
3
Press S / T to select a preset
number that you want to store the
current radio station.
4
Press PROG again to store.
Selecting a preset radio
station
G
Press TUNER on the remote, then press
S / T to select a preset number
(or use the numeric keypad on the
remote).
➜
The waveband, preset number followed
by radio frequency will appear.
001-049-hts3500-93-Eng1
Tuner Operations
1
DVD system's
display panel
2
FM / MW
1
START..
2
1
2
3
41
Deleting a preset radio
station
In tuner mode, press S / T on the
remote to select a preset radio station.
Press and hold 9 until "FM/MW X
DELETED" appears.
➜
"X" is the preset number.
➜
The radio station continues to play but
has been deleted from the preset list.
➜
The rest of the preset radio station
number remain unchanged.

Changing tuning grid

for all versions)
In some countries, the frequency step
between adjacent channels in the
MW/FM band is 9 kHz/50 kHz (10 kHz/
100 kHz in some areas). The preset
frequency step in the factory is
9 kHz/50 kHz.
IMPORTANT!
Changing the tuning grid will erase
all previously stored preset radio
stations.
Press SOURCE to select "FM" or "MW".
Press STANDBY ON to switch the
DVD system to standby mode.
Press STANDBY ON again to turn on
the DVD system and hold down S
button on the front panel.
➜ The display will show "GRID 9" or
"GRID 10".
Helpful Hint:
– GRID 9 and GRID 10 indicate that the
tuning grid is in step of 9 kHz and 10 kHz
respectively.
14/04/2005, 10:39 AM
(continued)
(not available
41