Advertisement
Pairing with a personal computer (PC)
1.
Turn on both your PC and SmartLink+.
Place them next to each other.
2.
Turn On your PC's Bluetooth function
Ensure your PC's Bluetooth function is turned ON:
Either activate your PC's built-in Bluetooth functionality or if your PC
doesn't have Bluetooth, connect an external USB Bluetooth adapter.
On your PC, open "Bluetooth devices" in Control Panel or access your
PC's Bluetooth settings via its Bluetooth icon.
3.
Set SmartLink+ to pairing mode
Initiate the pairing process by pressing and holding SmartLink+'s green
telephone button for 5 seconds, until entire display starts flashing.
SmartLink+ will remain in pairing mode for one minute or until pairing
is completed.
Bluetooth Pairing Guide
SmartLink+
4.
On the PC, choose to find and add a Bluetooth device.
Choose SmartLink+ from the list of Bluetooth devices found.
When the PC prompts you for a passcode or PIN, enter «0000»
(four zeros).
«0000» is the default code an can be changed by the audiologist if
desired. If the code has been changed, then the personal code has to
be entered.
The devices will now establish a trusted link. When the SmartLink+ has
been successfully paired with your PC, its display will stop flashing.
5.
If prompted by your PC to choose Bluetooth services, you might have
several options available. Select «Stereo Headset» to stream audio in
stereo. After choosing which services you wish to enable, you can com-
plete the connection and exit your PC's Bluetooth settings.
Search and pair SmartLink+ with your PC
Connect
Advertisement
