Advertisement
Pairing with an A2DP such as a
Bluetooth MP3 player
Note:
Due to simplicity, the expression «Bluetooth MP3» is used in the text
below to refer to a A2DP capable Bluetooth device.
1.
Charge and turn On both Bluetooth MP3 device and
SmartLink+.
Place them next to each other.
2.
Set SmartLink+ in pairing mode
Initiate the pairing process on SmartLink+ by pressing and holding the
green telephone button for 5 seconds, until the entire display starts
flashing. SmartLink+ will remain in pairing mode for one minute or
until pairing is completed.
Bluetooth Pairing Guide
SmartLink+
3.
Set your Bluetooth MP3 in pairing mode. Please consult the manual
of your Bluetooth MP3 to learn how the device can be set into pairing
mode.
If your Bluetooth MP3 comes with a display and menu option, the
pairing process will be similar to the pairing process with mobile
phones described on the first page.
4.
When the SmartLink+ display stops flashing, the pairing process is
complete. Press "Play" on your audio device and you should hear sound
through your hearing instruments.
Prepare the Bluetooth MP3 player for pairing
Finalize the pairing
Advertisement
