Step 3: Connecting Fm/Mw Antennas; Step 4: Connecting The Power Cord - Philips HTS3300/51 User Manual

Step 3: Connecting FM/MW
antennas
fix the claw
into the slot
➠
MW
1
antenna
L
R
1
Connect the supplied MW loop antenna
to the MW socket. Place the MW loop
antenna on a shelf, or attach it to a stand
or wall.
2
Connect the supplied FM antenna to the
FM socket. Extend the FM antenna and
fix its ends to the wall.
For better FM stereo reception, connect
an external FM antenna (not supplied).
Helpful Hints:
– Adjust the position of the antennas for
optimal reception.
– Position the antennas as far as possible
from your TV, VCR or other radiation source
to prevent unwanted interference.
001-045-hts3300-01-Eng3
Basic Connections
Step 4: Connecting the
FM
antenna
2
After everything is connected
properly, plug the AC power cord
into the power outlet.
The red Eco Power LED on the DVD
system will light up. Never make or
change any connections with the power
switched on.
Helpful Hint:
– Refer to the type plate on the rear of the
subwoofer for identification and supply
ratings.
11
(continued)
power cord
TV
L
R
DVD system
12/9/05, 11:30 AM 3139 115 2xxx1
11