Motorola RAZR User Manual page 43

People
• People: Touch
contacts
, check what you want to share (you can
Unselect all
choose ), then touch
Wi-Fi Networks
Turn Wi-Fi power on or off
Settings
Apps > , then touch the
turn it
ON
Note: To extend battery life, turn the Wi-Fi switch
when you're not using it.
Connect to networks
To find networks in your range:
1 Touch Apps >
Tip: To see your phone's MAC address and Wi-Fi
settings, touch Menu
2 Make sure the switch at the top is
SCAN
.
3 Touch a found network to connect it (if necessary,
Network SSID Security
enter ,
Connect
and touch ).
When your phone connects, the Wi-Fi status
indicator appears in the status bar.
Note: If you see a question mark in the Wi-Fi status
indicator , pull down the status bar, touch the
network, and enter the network's password.
Share
> Menu >
OK Bluetooth
>
Wi-Fi
switch to
Settings Wi-Fi
> .
Advanced
> .
, then touch
ON
Wireless password
, and
Tip: When Wi-Fi power is on, your phone automatically
reconnects to available networks it has used before.
.
Wi-Fi hotspot
Note: Keep it secure. To protect your phone and hotspot
from unauthorized access, it is strongly recommended
that you set up hotspot security, including password.
Find it: Apps
Hotspot
and check
OFF
1 Your phone turns off
network for Internet access. Touch
Settings
• SSID—Enter a unique name for your hotspot.
• Security—Select the type of security you want:
Open
password that others will need to access your
Wi-Fi hotspot.
Note:
• Channel—If you notice interference after your
hotspot has been active for a while, try different
,
channels.
Save
2 Touch
Mobile Hotspot
When
devices can connect by entering your hotspot's
selecting a
Wireless password
Settings Tethering & Mobile
> >
Mobile Hotspot
.
Wi-Fi
power and uses the mobile
Configure Mobile Hotspot
>
WPA2 WPA2
or . For , enter a unique
WPA2
is the most secure.
when the settings are complete.
is active, other Wi-Fi enabled
Security
type, and entering the correct
.
Mobile Hotspot
to set up security:
SSID
,
Connect & transfer 41