Wahl TM612 User Manual page 13

At this level, you can find out some statistics on the measurements made (Minimum, Maximum, Average and
Standard Deviation).
•
Press the F2 key three times (...) followed by the F1 key (STAT).
•
Press F2 (measurements) to return to the table of values.
•
Press CLEAR to quit the storage function.
Save burst:
This function makes it possible to record the burst in the memory.
• You are then requested to enter the name of a file. Using the navigation keys (↑ ↑ ↑ ↑ and ↓ ↓ ↓ ↓ ), scroll
down the letters.
•
Using the navigation keys (    and ), move the cursor by one position.
•
Using the F2 key( ), you can delete the characters already entered
•
Using the F2 key( ), you can delete the characters entered
•
Once you have entered the file name, confirm by pressing the VAL key.
Open a burst:
Allows you to choose a specific burst from the list and open it to display the values. At this level, you can
obtain information on the acquisition burst, such as the number of measurements, the date of acquisition, the
sensor used, etc.
New free burst:
TM612 TM612
Allows you to start a new acquisition burst. If a burst is under way, you will be requested to save it.
Burst management:
Allows you to display all the bursts recorded. At this level, you can delete one or all bursts.
Statistics:
Allows you to find out the number of bursts recorded, the number of bytes free as well as the number of
measurements that can be recorded.
- 25 - - 26 - - 25 -