Table of Contents
Advertisement
Getting Started
finding the correct viewing
channel
Press StaNDBY-ON 2 to turn on
A
this unit.
Turn on the TV and switch it to the
B
correct video-in channel. You should see
the blue DVD background screen.
You may go to the lowest channel on
your TV, then press the Channel Down
button on your TV's remote control until
you see the Video In channel.
You may press ° button repeatedly
on your TV's remote control.
Usually this channel is between the
lowest and highest channels and may be
called FRONT, A/V IN, VIDEO, etc.
Refer to your TV user manual on how
to select the correct input on your TV.
If you are using external device, (such as
C
audio system or receiver), turn it on and
select the appropriate input source for
this unit output. Refer to the device user
manual for detail.
18
1dvp6620_eu_eng.indd 18
Setting language preferences
The language options are different
depending on your country or region. It
may not correspond to the illustrations
shown on the user manual.
On-screen display (OSD) language
Select this to change the language of the
On screen display menu of this unit.
The menu language will remain once you
have set it.
Press SetUP on the remote control.
A
{ General Setup Page } appears.
Use keys to select { OSD
B
Language } in the menu and press .
General Setup Page
Disc Lock
ENGLISH
OSD Language
FRANÇAIS
Sleep
DEUTSCH
Lip Sync
ITALIANO
Volume
ESPAÑOL
DivX(R) VOD Code
PORTUGUÊS
NEDERLANDS
Use keys to select a language and
C
press OK to confirm.
2008-08-06 2:21:22 PM
Advertisement
Table of Contents
