Table of Contents
Advertisement
Disc Operations
IMPORTANT!
If the inhibit icon appears on the
TV screen when a button is
pressed, it means the function is
not available on the current disc
or at the current time.
Playing discs
1
Connect the power cords of the DVD
Player and TV (and any optional stereo or
AV receiver) to a power outlet.
2
Turn on the TV power and set to the
correct Video In channel. (See page 12
"Setting up the TV").
3
Press STANDBY-ON on the DVD Player
front panel.
You should see the blue Philips DVD
background screen on the TV.
4
Press OPEN•CLOSE 0 button to open
the disc tray and load in a disc, then press
the same button again to close the disc
tray.
Make sure the label side is facing up.
For double-sided discs, load the side you
want to play facing up.
5
Playback will start automatically
(depending on the disc type).
If a disc menu appears on the TV, see
"Using the Disc Menu".
If the disc is locked by parental control,
you must enter your four-digit password.
(See page 31-32).
6
At any time, simply press STOP to stop
playback.
16
01-40 DVP640K_751
Using the Disc Menu
Depending on the disc, a menu may
appear on the TV screen once you load
the disc.
To select a playback feature or item
Use the 1 2 3 4 or numeric keypad
(0-9) on the Remote Control, then press
PLAY B to start playback.
To access to the menu
Press DISC MENU on the Remote
Control.
Basic playback controls
Unless otherwise stated, all operations
described are based on Remote Control
use.
Pausing playback
(DVD/VCD/CD)
1
During playback, press PAUSE ;.
Playback will pause and sound will be
muted.
2
During pause mode, press 1 2 to select
the previous or next picture frame.
3
To return to normal playback, press
PLAY B.
Selecting track/chapter
(DVD/VCD/CD)
Press S / T or use the numeric
keypad (0-9) to key in a track/chapter
number, then press PLAY B to start
playback.
16
8239 300 30402
7/04/2004, 4:49 PM
Advertisement
Table of Contents
