Selecting surround sound
G
Press SURROUND on the remote to
select : MULTI-CHANNEL or STEREO.
➜
The availability of the various surround
sound modes depends on the number of
speakers used and the sound available on
the disc.
➜
The centre and rear speakers operate
only in Multi-channel surround mode.
➜
The available output modes for Multi-
channel include: Dolby Digital, DTS
(Digital Theater Systems) Surround and
Dolby Pro Logic II.
➜
Stereo broadcasts or recordings will
produce some surround channel effects
when played in a surround mode.
However, mono (single channel sound)
sources will not produce any sound from
the rear speakers.
Helpful Hints:
–
The SURROUND button is not
functional for SACD playback. You have to
access the disc menu in order to select
between multi-channel and stereo tracks, see
page 29.
–
You are not able to select the surround
sound mode if the system setup menu is
turned on
01-43 DVP5505S_03_RC2
Sound and Volume Controls
Selecting digital sound effects
Select a preset digital sound effects that
matches your disc's content or that
optimises the sound of the musical style
you are playing.
G
Press SOUND to select the available
sound effect.
When playing movie discs, you can select :
CONCERT, DRAMA, ACTION or SCI-FI.
When playing music discs, you can select :
ROCK, DIGITAL, CLASSIC or JAZZ.
Helpful Hint:
–
For flat sound output, select CONCERT
or CLASSIC.
Volume control
To turn off the volume temporarily
G
Press MUTE on the remote.
➜
Playback will continue without sound
and "MUTE" appears.
➜
To restore the volume, press MUTE
again, or increase the volume level.
37
10/05/05, 10:05 AM
37