Manual of Wireless Router
Wireless Router supply passive POE for PD equipment
The working diagram as follow:
Note:
DC Power for wireless router should be 24V/1A, PD equipment should support 24V Passive POE.
1.4 Operation Mode:
There are four operation modes on this wireless router
1.5 Gateway: Supply WAN Connection from DSL, cable or broadband mobile phone network through
PPPoE, Static IP, Dynamic IP operation.
1.6 Wireless AP: Plug and Play to transmit wireless signal for wireless end users from wired networking.
1.7 Wireless Repeater: Wireless receive and transmit, to extend the existing wireless networking for
more range. In this operation mode, if SSID disable, wireless router work in bridge.
P1 Power Supply
P2. Gateway Operation mode
P3. Wireless AP Operation mode
Version 1.0 – July 2016
4