Philips DVP4320BL User Manual page 16

Note
If the language you have set is not available on the disc,
the disc uses its own default language.
For some DVDs, the subtitle/audio language can only
change from the disc menu.
To select the languages that are not listed in the menu,
select [Others]. Then check the Language Code list at
the back of this user manual and enter the respective
language code.
[Parental control]
Restrict access to discs that are unsuitable for
children. These types of discs must be recorded
with ratings.
1. Press OK.
2. Select a rating level, then press OK.
3. Press the numeric buttons to enter the
password.
Note
Rated DVDs above the level you set in [Parental
control] require a password to be played.
The ratings are country-dependent. To allow all discs to
play, select '8
Some discs have ratings printed on them but are not
recorded with ratings. This function has no effect on
such discs.
[PBC]
Turn on or off the content menu of VCDs/SVCDs
with PBC (playback control) feature.
[On] - Display the index menu when you load
a disc for play.
[Off] - Skip the menu and start play from the
[MP3/JPEG Nav]
[View Files]
[View Folders] - Display the folders of MP3/
[Password]
Set or change the password for locked discs and
play restricted DVDs.
1. Press the Numeric buttons
the last set password at [Old Password]
2. Enter the new password at [New Password]
3. Enter the new password again at
PWD]
4. Press OK to exit the menu.
Note
a new password.
[DivX Subtitle]
Select a character set that supports the DivX
subtitle.
-
Note
[Version Info]
Display the software version of this product.
Tip
if a newest software version is available at the Philips
website that you may download and install on this
product.
[Default]
Reset all the settings of this product to factory
default, except for [Disc Lock], [Parental control]
and [Password] settings.
7 Additional information
Update software
For software updates, check the current software
version of this product to compare with the latest
software (if available) at the Philips website.
Caution
Power supply must not be interrupted during software
upgrade.
1
Press SETUP.
2
Select [Preferences] > [Version Info], then
press OK.
Stop disc play before you can access to
[Preferences].
3
Write down the software version and the
model name, then press SETUP to exit the
menu.
EN 33