Baby Trend HC57B Instruction Manual page 4

ASSEMBLY
• Squeeze the Release Handles on both
2)
sides simultaneously and push the tube
through the Height Adjusters until it locks
in the highest position (Fig. 2).
• Connect the Front and Rear Legs to the
3)
Upper Frame Assemblies by inserting
the tube ends into the extension tubes
(Fig. 3).
NOTE: Legs are properly connected
when the lock buttons are lined up with
the holes on the ends of the Upper
Frame Assemblies. Make sure the lock
buttons are engaged before use.
5
Copyright © 2016, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Release Handle
Fig. 2
Extension Tubes
Rear Leg
Front Leg
Fig. 3
TO ASSEMBLE BOOSTER SEAT
• approved SNAP TECH products can be
ONLY
TM
used on the frame.
• Slide Footrest posts into the front of the
4)
Seat until it clicks into place (Fig. 4a).
• Connect the Seat and lock into place
(Fig. 4b). Pull up to make sure it's locked
firmly in place before use (Fig. 4c).
Copyright © 2016, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
ASSEMBLY
Fig. 4a
Fig. 4b
Fig. 4c
6