Table of Contents
Advertisement
5.9 Backup desiccant tube
Your camera includes high-performance desiccant tablets to eliminate condensation in the CMOS
chamber. Desiccant tablets are already installed in your cooled ASI camera, and the sealed packet
included with your camera is only for backup.
Attention:
Only when dew problem happens inside CMOS chamber, you need to unscrew the air socket and
insert the desiccant tube, then wait for 24 hours for the CMOS chamber to become dry again.
Here are the steps how to mount the desiccant tube to the camera for drying.
Put 2 pcs of desiccant tablets into it and cover
its back.
Screw off the air socket from the camera body.
Take off the top cover from the desiccant tube.
Remove the nut.
Insert the desiccant tube into your camera body.
12
ASI071 Manual
Advertisement
Table of Contents
