Advertisement

XRC 200
UNIVERSAL
REMOTE
CONTROL
(Made in China)
GETTING STARTED
Congratulations! Your XRC
200 universal remote control
brings new convenience to
television viewing. By
pressing a few keys, you can
see what is on TV, select a
program to watch, set up to
record programs on your
VCR, and much more.
The XRC 200 universal
remote control has been
designed to control most TV
sets and VCRs on the market
today as well as your cable
device, eliminating the
frustration of having to use
several remote controls.
Before you start to program
your remote control, please
read the following important
instructions.
The XRC 200 enables you to:
Control multiple devices
such as a
device, TV, and VCR.
Control an auxiliary device
such as
a second TV or
VCR or a digital audio
tuner.
Control the volume
through your TV while in
Cable mode. (Refer to
Control later
brochure.)
Control services such as
Digital
TM and Music
REPLACING THE
Use two fresh 1.5 volt, AA
batteries. To install or
replace the batteries:
1. Slide the battery door
open on the back of the
remote
control.
2. Remove
the old
batteries,
and insert
the new
ones as
indicated.
3. Slide the
battery
door
closed until
it snaps
into place.
cable
4. Point the
remote
control at
your cable
device, press CABLE, and
then press POWER. The
CABLE key lights.
If the key does not light, check
the battery orientation, or
replace the batteries as
in this
needed.
Music Express
Choice
SM
BATTERIES
.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XRC 200 and is the answer not in the manual?

Questions and answers

Summary of Contents for General Instrument XRC 200

  • Page 1 Before you start to program indicated. your remote control, please read the following important 3. Slide the instructions. battery door The XRC 200 enables you to: closed until it snaps • Control multiple devices into place. such as a cable device, TV, and VCR.
  • Page 2 CABLE DEVICE, TV, AND VCR 1. Look up the device The XRC 200 is already manufacturer in the Device USING THE KEYBOARD programmed to control the General Codes section and note the Instrument CFT2200 and DCT1000 code.
  • Page 3 Audiosonic Perform the following steps to read Audiovox 003, 180 CONTROL You can program your XRC 200 to the code currently set for a device. Beloar control the volume through the TV This is useful for retrieving a device Bell & Howard 016, 154 while in any other mode.
  • Page 4 Hitachi 032, 038, 056, Panasonic 051, 054, 055, Sony 000, 011, 080, 109, 145, 151, 162, 226, 250, 111, 353 173, 227, 279, 338, 375 Soundesign 178, 179, 180, 186 409, 413 Penney 002, 003, 018, Spectricon 003, 137 019, 021, 027, Squareview Infinity 030, 032, 039,...
  • Page 5 Broksonic 121, 184, 211, Memorex 000, 035, 037, Sears 035, 037, 042, 295, 361 039, 046, 047, 046, 047, 054, Calix 048, 240, 268, 057, 105 Canon 035, 102 Sharp 048, 062 Capehart Shintom Carver MGN Technology 240 Shogun 051, 240 072, 278 Minolta 042, 105...

Table of Contents