Turn On Progressive Scan - Philips DVP3336 User Manual

Turn on progressive scan

Note
To use the progressive scan feature, you
must connect a progressive scan TV with the
component video jacks (see "Connect" >
"Connect video cables" > "Option 1: Connect
to the component video jacks" for details).
Video Steup
TV System
TV Display
Progressive
Picture Setting
1
Turn on the TV to the correct viewing
channel for this product.
2
Press SETUP.
3
Press to select [Video Setup].
4
Select [Progressive] > [On], then press
OK.
»
A warning message is displayed.
5
To proceed, select [Ok] and press OK.
»
The progressive setup is complete.
Note
If a blank/distorted screen is displayed, wait for
15 seconds for the auto recovery.
If no picture is displayed, turn off the
progressive scan mode as follows:
1) Press to open the disc compartment.
2) Press the Numeric button '1'.
12 EN
On
Off
6
Press SETUP to exit the menu.
7
You can now turn on the progressive
scan mode on the TV (see the TV user
manual).
Note
During play, when the progressive scan
mode is on for both this product and the TV,
distorted picture may display. In this case, turn
off the progressive scan feature on both this
product and the TV.