CONTENTS Cautions and Safety ___________________________________________________ 1 Assembling your MagneTrainer _________________________________________ 2 Using the MagneTrainer with Your Legs __________________________________ 4 Using the MagneTrainer with Your Arms __________________________________ 4 Keeping the Bike in Place ______________________________________________ 5 Using the Display _____________________________________________________ 6 Free Online Calorie Calculator __________________________________________ 7 Optional Accessories __________________________________________________ 7 Care and Maintenance ________________________________________________ 8 Spare Parts __________________________________________________________ 8...
Cautions and Safety Cautions Failure to observe these warnings could result in physical injury or damage to the MagneTrainer. Use the MagneTrainer indoors on a level surface. Keep the MagneTrainer away from moisture and dust. Make sure that the pedals are on tight. Loose pedals will slowly come undone. Using the bike with loose pedals can damage the threads on the crank arms.
Assembling your MagneTrainer Step 1: Install the Fixed Leg Place the bike on a hard flat surface! Remove the nuts and washers from the Fixed Leg. Align the bolts of the Fixed Leg with the holes in the Bike, and push the bolts through the holes.
Page 5
Step 2: Install the Adjustable Leg Insert the Adjustable Leg into the Bike. Then use the provided Tool to tighten the nuts on the fixed leg. Then screw the Wing Nut into the Bike and tighten by hand. For the maximum stability, extend the Adjustable Leg as far out as possible.
Using the MagneTrainer with Your Legs Start at the Minimum Resistance When you first get the bike, start off at the lowest pedal resistance setting. Gradually increase the tension as you get used to pedaling the bike downward. It’s easier to learn how to use the bike correctly at the lower resistances.
Keeping the Bike in Place Pedal the Bike Downward The most important advice we can give you is to pedal downward. This will keep the bike in place. See previous page for details. For even more details, go to the following link. www.MagneTrainer.com/HowToPedalAMiniExerciseBike.php Extend the Adjustable Leg For maximum stability the Adjustable Leg should be extended as far...
Using the Display How to Read the Display There are two numbers displayed on the monitor, one on the top and one on the bottom. Top Number: The top number always displays your pedal speed, in miles per hour. Bottom Number: The bottom number can display Distance, Calories or Time.
Free Online Calorie Calculator Calorie Calculator – Provides accurate calculation of Calories burned when using the bike. The Calorie Calculator uses your height, weight, gender, and age for improved accuracy. It also calculates the wattage of the bike from the knob setting and the pedal speed.
Care and Maintenance Do Not Lubricate The MagneTrainer contains sealed bearings for years of maintenance-free use. No lubrication is needed. In fact, some lubricants contain chemicals that can actually harm the bearings. Clean the Dycem® Pads Two Dycem® pads are included with each MagneTrainer. You can place the pads under the bike as shown in the picture.
US, the warranty depends on your local retailer. What is covered? 3D Innovations warrants the MagneTrainer and accessories against defects in material or workmanship for a full year from the date of purchase. 3D Innovations will, at its option, repair or replace the object. ...
Need help?
Do you have a question about the magnetraner-er and is the answer not in the manual?
Questions and answers