909 HT7102-AUOXY Instruction Manual

909 HT7102-AUOXY Instruction Manual

6/12v dc battery charger / maintainer

Advertisement

INSTRUCTION MANUAL
HT7102-AUOXY
6/12V dc
Battery Charger / Maintainer

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HT7102-AUOXY and is the answer not in the manual?

Questions and answers

Summary of Contents for 909 HT7102-AUOXY

  • Page 1 INSTRUCTION MANUAL HT7102-AUOXY 6/12V dc Battery Charger / Maintainer...
  • Page 2: Table Of Contents

    CONTENTS Warranty Warranty Introduction For full details please visit us at www.909.com Environmental protection Specifications General safety warnings and instructions Important safety instructions Specific safety instructions for power cords Specific safety instructions for battery chargers First aid Connection precautions Know your Product...
  • Page 3: Introduction

    Manual before using your new 909 appliance. Take Do not attempt to charge Non Rechargeable batteries. special care to heed the Cautions and Warnings. Your 909 appliance has many features that will make your Safety guidelines / definitions job faster and easier. Safety, performance, and...
  • Page 4: Important Safety Instructions

    extension cord is used, make sure that the pins of the Important safety instructions extension cord are the same number, size and shape as • Avoid dangerous environments. Don’t use battery those in the charger. Make sure your extension cord is in chargers in damp or wet locations.
  • Page 5: First Aid

    cautionary markings on these products and on the contact with battery acid may cause blindness and/or engine. severe burns. Be aware of first aid procedures in case of accidental contact with the instructions carefully before • This equipment employs parts (switches, relays, etc.) that using your new battery charger produce arcs or sparks.
  • Page 6: Connection Precautions

    Connection precautions • Connect and disconnect output clamps or vehicle accessory plug only after removing AC cord from electric outlet. • Never allow clamps to touch each other. • Attach clamps only as indicated in “Charging Using the Supplied Battery Clips.” Save these instructions WARNING: To reduce the risk of injury or property damage: Follow these instructions and those published by...
  • Page 7: Know Your Product

    Know your product 1. Reverse polarity indicator 2 Charging complete LED 3. Battery charging LED 4. Power LED 5. Battery voltage selector 6. Battery clips 7. 12 volt DC vehicle adapter plug...
  • Page 8: Operating Instructions

    Operating instructions Charging using the supplied battery clips WARNING: a spark near the battery may cause an Preparing to charge explosion. To reduce the risk of a spark near the battery 1. Determine voltage of battery to be charged by referring to position AC and DC cords away from hood, door, or the vehicle manual.
  • Page 9: Troubleshooting

    7. When the charging complete LED lights, the battery is If you need assistance regarding accessories, please fully charged. contact manufacturer at www.909.com When disconnecting charger, disconnect AC cord, turn the WARNING: The use of any accessory not recommended for ignition switch to the OFF position, and then remove the 12 use with this appliance could be hazardous.

Table of Contents