IMPORTANT READ SAVE SAFETY INSTRUCTIONS. ENTIRE MANUAL PRIOR TO USE. These INSTRUCTIONS Yea, the boring stuff ... but read it, so you don’t jack things up! Please read through these instructions completely to be sure you’re comfortable with this easy install process.
Page 3
Grab Your Tools Tape Pencil Phillips Level Electric Drill Measure Screwdriver "We won't tell Phil you borrowed it." Wood Stud Install Concrete Install Drywall Install 3/16 in. 3/8 in. 3/8 in. 3/8 in. 3/8 in. (10 mm) (10 mm) (5 mm) (10 mm) (10 mm) Wood...
What’s in the Box DON'T FEED TO CHILDREN — This product contains small items WARNING: that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer;...
Page 5
NOTE: Not all hardware included in this kit will be used. STUFF FOR STEP 2 End Caps M6x12 mm (Wall Plate) Shelf You're ready! LET’S DO THIS!
Page 6
STEP 1A Install the Wall Plate (For Wood Stud) Find a Stud Mark Holes STEP 1A.1 STEP 1A.2 "Keep it on the level" Verify stud edges with a stud fi nder ..and/or probe with an awl or a "favorite Stud center small drill bit.
Page 7
Drill Holes Secure Wall Plate STEP 1A.3 STEP 1A.4 2¾ in. (70 mm) If needed, use a 3/8 in. (10 mm) socket [thin-wall or 1/4 3/16 in. in. drive socket] (5 mm) Go to STEP 2 on PAGE 12...
Page 8
STEP 1B Install the Wall Plate (For DRYWALL) Mark Holes Drill Holes STEP 1B.1 STEP 1B.2 1 in. (25 mm) 3/8 in. "Keep it on (10 mm) the level" "This is a wall ... you can't mount in thin air ... duh"...
Page 9
Insert Anchors Secure Wall Plate STEP 1B.3 STEP 1B.4 IMPORTANT: DO NOT use power tools for this step. "Had something hilarious here about pinching ... but HR tied our hands" Go to STEP 2 on PAGE 12...
Page 10
STEP 1C Install the Wall Plate (For CONCRETE) Mark Holes Drill Holes STEP 1C.1 STEP 1C.2 3 in. (75 mm) "Keep it on the level" 3/8 in. (10 mm)
Page 11
Insert Anchors Secure Wall Plate STEP 1C.3 STEP 1C.4 If needed, use a 3/8 in. (10 mm) socket [thin-wall or 1/4 in. drive socket]...
Page 12
STEP 2 Attach Shelf to Wall Plate Insert End Caps STEP 2.1...
Page 16
Confuzzled? Call the ECHOGEAR Team: 1-855-428-2490 helpmehelpyou@ECHOGEAR.com “Wanna show off your hard work? Share a picture of your completed project with #YourGearUpgraded. Who knows, it might not be as bad as you thought” 6901-602036 00 Milestone Global Headquarters • 6436 City West Parkway • Eden Prairie, MN 55344 USA...