Download  Print this page

UPM RCT100 Owner's Manual Page 2

Programmable timer with wireless photocell transmitter.
Hide thumbs
   

Advertisement

PHOTOCELL TRANSMITTER
1
Plug timer into wall socket
2
Press and hold ON/OFF and
together on timer while
simultaneously pressing the RF
button on the transmitter. (The
green LED indicator on the
transmitter will flash when RF is
pressed).
Once the learn function has been successfully executed,
3
the
symbol will flash on the top right corner of the LCD
on the timer, every time the transmitter sends a signal or
when the RF button is pressed.
The photocell transmitter can control multiple remote programmable timers.
Repeat
1
and
2
for additional timers (available at your local retailer).
The transmitter uses an intelligent code system to prevent interference
*
from other sources. But if you do experience such interference, you can
press the NEW CODE button to generate a new random house code.
However, after pressing the NEW CODE button, you will need to redo the
LEARNING procedure as described above.
PAGE 4
RANDOM FUNCTION
short/
Short random from
1
OR Long random from
CD
2
Press RANDOM
Flashing
RND
for short random
3
-
Flashing
L RND
for long random
* Short random 1-2 hours, long random 2-3 hours
programmable random
1
Select program 20 with
2
Press RANDOM
3
Set program 20 to desired random time
4
3
Solid
RND
for programmable
* Programmable random only works with program 20; 1-2 hours
Deactivate random function with RANDOM or ON/OFF
PAGE 10
PHOTOCELL TRANSMITTER
learn function
The photocell transmitter works by detecting the brightness level of its
surroundings and sends ON or OFF commands to the timer. The transmitter can
be set to trigger the timer to run for 30mins, 1, 2, 4, 6, 8, 10hrs or continuously,
3
and will automatically turn the timer OFF when the photocell senses a change
from dark to bright (in NIGHT mode) or bright to dark (in DAY mode).
RESET
ON/OFF
RANDOM
CD
SET
PROGRAM
2
LEARN
Slide MODE SWITCH:
1
and
down
*
Turn TIMING CONTROL DIAL to select delay off time.
2
1
(30 minutes, 1, 2, 4, 6, 8, 10 hours, or continuous)
DAY MODE:
NIGHT MODE:
TROUBLESHOOTING
problem
long
random
LCD display seems "frozen". Buttons
won't respond.
3
Timer loses programs when unplugged
Programmed ON/OFF times don't
1
execute
RESET
ON/OFF
CD
RANDOM
2
Programmed ON/OFF times don't
SET
PROGRAM
execute at specified times.
Transmitter stops turning receiver on
and off.
FCC / RSS-210 COMPLIANCE
This device complies with Part 15 of the FCC Rules and RSS-210 of
Industry Canada. Operation is subject to the following two conditions:
4
3
1. this device may not cause harmful interference, and
2. this device must accept any interference received, including
interference that may cause undesired operation.
1
RESET
TECHNICAL SPECIFICATIONS
ON/OFF
CD
RANDOM
2
PROGRAM
SET
Programmable Timer RCT100
Ratings: 120V AC, 15A
Max Load: 1800W resistive; 600W tungsten
Photocell Transmitter RT601
Transmission Range: up to 40m in open area
Transmission Frequency: 433.92 M z
2
up
for DAY mode
for NIGHT mode
1
day mode / night mode
Transmits an "ON" command to the timer when photocell
senses a change from dark to bright. Transmits an "OFF"
command after the time delay as set by the Timing
Control Dial or when it turns from bright to dark.
Transmits an "ON" command to the timer when photocell
senses a change from bright to dark. Transmits an "OFF"
command after the time delay as set by the Timing
Control Dial or when it turns from dark to bright.
PAGE 5
solution
Press reset button to reset timer.
Replace batteries.
Ensure that the program disable feature is
not enabled.
Ensure that the random function is not
enabled.
Use the LEARN function to reprogram the
receiver or check the batteries.
H
PAGE 11
PHOTOCELL TRANSMITTER
!
For safety, set the photocell transmitter to trigger the
lights ON inside your doorway at dusk.
!
For convenience, set the photocell transmitter to start
your coffee maker at first light.
!
For security, set the transmitter to activate lights in
your home while you are away (day or night).
!
For energy savings, set the transmitter to trigger your
timer for controlled periods of time.
!
To maximize functionality, combine the time settings of
the photocell transmitter with those of the
programmable timer to achieve your desired ON/OFF
applications.
PAGE 6
INSTRUCTION TO THE USER
This equipment has been tested and found to comply with the limits for a
class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy and if not installed and used in accordance with the
instructions , may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
!
!
Reorient or relocate the receiving antenna.
!
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
!
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
In order to maintain compliance with FCC regulations, shielded cables must
be used with this equipment. Operation with non-approved equipment or
unshielded cables is likely to result in interference to radio and TV reception.
The user is cautioned that changes and modifications made to the
equipment without the approval of manufacturer could void the user's
authority to operate this equipment.
PAGE 12
applications

Advertisement

Table of Contents

   Related Manuals for UPM RCT100

This manual is also suitable for:

Rt601

Comments to this Manuals

Symbols: 0
Latest comments:
  • Doug McNally Nov 19, 2018 07:51:
    ||I have a programmab​le RCT100 without the Photocell transmitte​r. I seem to be getting a beep perhaps hourly from this machine. Could this be a low battery indicator. I have never replaced the two two button cell batteries?