Cen-Tec CT23QD Manual

Electric brush

Table of Contents

Download this manual

Enlarged version

LIMITED WARRANTY

™

Subject to the conditions and exceptions stated in this

warranty Cen-Tec Systems warrants the products sold by

Cen-Tec Systems to be free from defects in materials and

workmanship under normal residential use and service for

two (2) years from the date of delivery on presentation of the

original contract or invoice. A copy of the original bill of sale

must accompany all warranty requests. If one is not produced

as required the manufactures date code will be used.

CONTACT INFORMATION

1807 Morrissey Drive

Bloomington, Illinois 61704

PHONE: (309) 664-0328

TOLL FREE: (800) 833-2822

FAX: (309 663-8766

EMAIL: help@centecsystems.com

WEBSITE: www.centecsystems.com

CT23QD Electric Brush Manual

www.centeccommercial.com

Table of Contents

Do you have a question about the CT23QD and is the answer not in the manual?

Page 1: Limited Warranty
Subject to the conditions and exceptions stated in this warranty Cen-Tec Systems warrants the products sold by Cen-Tec Systems to be free from defects in materials and workmanship under normal residential use and service for two (2) years from the date of delivery on presentation of the original contract or invoice.
Page 2: Safety Instructions
Cen-Tec CT23QD Safety instructions Electric Brush Parts Explosion CENTEC Part # Object Description Electric shock could WARNING 38672 FLOOR NOZZLE UPPER occur if used out doors 38683 BUTTON (EXTENSION) (DECO) or on wet surfaces. 38694 WINDOW COVER (HEIGHT ADJ.) 38705 FURNITURE GUARD Please read all instructions before using this Electric Powerhead.
Page 3 Cen-Tec CT23QD Vacuuming tips Electric Brush Parts Explosion Suggested Sweeping Pattern Wand Upright Locked Position For best cleaning action, the powerhead should be pushed straight away from you and pulled When the wand is returned straight back. At the end of each pull stroke, the...
Page 4 Belt & Agitator Changing/Replacement Agitator Cleaning To Replace Agitator To Replace Light Bulb To Clean Agitator 5) Lift both sides of the agitator out of the holding slots and 1) Turn the nozzle upside After taking off the black top NOTE: In order to keep cleaning pull it through the belt loop.